|
||
| The
success behind most FW weighing systems is the remarkable Model DWM-IV weightmeter. Unquestionably the proven standard for reliability, there are currently over 30,000 units carrying their load in industry every day! |
| 30 years of experience have refined simple, reliable and industrially robust material handling systems. Isolating the weighing mechanics from the feeding process eliminates interference between vibration and accuracy. |
- Capacity:
32 ounces X 0.1 ounce (2 X 0.005 lb)
- Throughput approximately 15 pkg. per minute
- Hoffman Nema-12 enclosure. 14"h X 12'w X 6'd
- Full
numerical data entry keypad
- Man/Off/Auto
(3 position selector)
Selects manual or automatic modes of operation
Off position removes controls power source.
- Start
Auto / Sngl (3 position toggle)
Start Auto is a maintained contact, selection will automatically initiate refill of the scale upon discharge of the previous fill.
Start Sngl is a momentary contact, spring return to center. Toggle Sngle to initiate a single fill cycle without automatic refill (ideal or testing, "one-shots", or production setup). - Pull on/Push
Off (mushroom push button)
Provides emergency stop. Pull on allows the operation to resume from where it left off. - Disch
(push button)
Provides front panel control of scale discharge. The Disch operator has a parallel remote input for external use, such as a foot switch, or empty container position switch. - Man Feed
Fast / Slow (3 position toggle)
When in the manual mode, allows front panel of fast and slow feed control. The slow position is a momentary contact, spring return to center (Jog). - Fast and
Slow feeder speed (1-10 vernier dial knob)
FMC Syntron SCR controllers for both Fast and Slow.
- FMC Sytron vibratory feed
- Full height floor mounted stands, heavy square tube construction.
- All stainless steel product contact surfaces.
- High precision strain gauge load-receiver for maximum accuracy.
- Separate scale load-reciever stand isolates precision weighing process from vibrations of feeder/ supply vibrators or oscillators.
- Stainless steel sheet metal side shrouds protect the scale load-receiver from accidental abuse and provides breeze break.
- Stainless steel discharge transition chute is custom fabricated to suit package / container specifications. Optional transitions can be quickly interchanged to accommodates varieties of different containers.
- Stainless steel, 1.5 cubic foot supply surge / storage hopper.
- All pneumatics for turnkey installation; Scale discharge, cylinder, actuating valve, regulator, filter and clear filter bowl. All electronics / electrical for plug-in, 120 VAC installation.
|
|
|
|
|
|
|
|
|
|
|