|
Internal Resolution
|
1,000,000 counts at 3mV/V
|
|
Display Resolution
|
Selectable (1/10,000 NTEP approval pending)
|
|
Input Sensitivity
|
1uV/graduation typical, 0.4uV/graduation minimum
|
|
Display Increments
|
Selectable x1, x2, x5, x10, x20, x50, x100
|
|
Decimal Point
|
Selectable 0 ~ 4
|
|
Display
|
7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function select, Stable, Center Zero, Net, Print, kg, lb, and Low Battery display
|
|
Keyboard
|
Standard - 6 button tactile keypad including Power On/Off key
Optional - 18 button tactile keypad including Power On/Off key
|
|
Audio Alarm
|
Tone for key entry confirmation and low battery alarm
|
|
A/D Conversion Rate
|
7.5 updates per second
|
|
Load Cell Excitation Voltage
|
9.7VDC or 5VDC selectable. Drive up to six 350 ohm load cells
|
|
Analog Input Range
|
0.2mV/V to 3.0mV/V maximum
|
|
Non-Linearity
|
0.01% of full scale or less
|
|
Over Capacity
|
Display “CAP OL” when exceeds full scale capacity
|
|
Tare
|
Standard - Pushbutton tare
Optional - Pushbutton tare, numeric tare entry & 10 predefined tare recall
|
|
Auto Zero Tracking
|
Selectable to 3.0 d by 0.5 d step
|
|
Motion Window
|
Key in data 0..255 (1 = 0.5 d)
|
|
Calibration Method
|
Software – Menu driven prompting
|
|
Units of Measure
|
Selectable kg/lb/g/oz, up to 2 units displayable
|
|
RFI/EMI Protection
|
All signal and excitation lines filtered to –65db min. @ 500MHz
|
|
Filtering
|
Selectable digital filter
|
|
RS-232C data output
|
COM Port 1. Full Duplex or Bi-directional
COM Port 2. Simplex or Unidirectional (output only)
Selectable baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional communication
|
|
Remote Display
|
Standard – Remote only
Optional - Programmable as Main Indicator or Remote Display
|
|
Custom Print Format
|
Programmable, up to 119 characters for Custom Print Format and up to 23 characters for Continuous Print Format
|
|
Set Points
|
Standard - None
Optional - Selectable up to 2 Set Points for Low and High limit settings
|
|
Power
|
100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery
(Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional)
|
|
Current Consumption
|
100mA + 30mA per 350 ohm load cell
|
|
Operating Temp
|
-10 degrees C to + 40 degrees C
|
|
Relative Humidity
|
Maximum 90% RH, Non-condensing
|
|
Dimensions
|
150 (6”)H x 230 (9.1”)W x 100 (4”)D mm - ABS (Standard)
140 (5.5”)H x 230 (9.1”)W x 90 (3.5”)D mm - Stainless Steel (Optional)
|
|
Shipping Weight
|
2.7lb (5.1lb with optional battery) – ABS (Standard)
4.7lb (7.1lb with optional battery) – Stainless Steel (Optional)
|
|
Enclosure
|
ABS Plastic Casing, Optional Stainless Steel, NEMA 4-X
|
|
Warranty
|
One Year Limited Warranty
|
