- NTEP COC #93-011
- Premium, environmentally protected load cells, FM approved
- Ultra-Low Profile, for easy access and use.
- Built-in ramps for convenient roll-on/roll-off
- Oversized loads can be weighed across the side rails
- Rugged pre-stressed steel platform construction
- External summing card, NEMA-4 enclosed
- 100% end loading capacity
- Mild steel or stainless steel construction
- Wide choice of options and custom configurations
- Limited
5 year warrant
|
|
|||
|
MODEL
(Ultra Low-Pro) |
PLATFORM SIZE
(W x L x H inches) |
CAPACITY
(Pounds/Kilograms) |
SHIP WEIGHT |
|
PAINTED STEEL, TREAD PLATE PLATFORM AND RAMPS
|
|||
|
LP 3030-1K
|
30 X 30 X 1
|
1000 lb / 500 kg
|
190
lb
|
|
LP 3030-1.5K
|
30 X 30 X 1
|
1500 lb / 1250 kg
|
190
lb
|
|
LP 3648-1.5K
|
36 X 48 X 1
|
1500 lb / 1250 kg
|
360 lb
|
|
LP 3672-1.5K
|
36 X 72 X 1
|
1500 lb / 1250 kg
|
550 lb
|
- Single
Ramp design, with "roll-off guard" on rear platform edge.
- Ideal for corner, or against-the-wall installations.
- Stainless Steel load cells, Welded Seals
- Epoxy Coating Process
- Weightmeter column, 54" high (variations: no charge) floor mounted, painted steel
- Weightmeter column, 54" high (variations: no charge) floor mounted, stainless steel
- Quick-disconnect
- "SMART-TIP" Option: When mounting the model DWM-IV weightmeter within 12' (load cell cable length) of the model LP, the load cell summing board can be installed in the DWM-IV enclosure on an Option Board Mounting Bracket. At time of order, specify this "smart-tip" to delete the standard J-Box and add modifications and hardware to model DWM-IV.
|
|
|
|
|
|
|
|
|
|
|