| The specialized GF-SW / IM-WB provides a simple and maintenance-free solution for creating automated In-Motion weight processing. The design concept will satisfy many routine case weighing (or checkweighing) applications, without the requirements of relatively high cost powered conveyor. |
There is no "standard" length, width, height or capacity for gravity feed In-Motion scales. Express System #642 & 643 are only two examples. All Flex-Weigh gravity feed In-Motion scales are built specific to their application, and can range between small units of 5 Lb. capacity, up to quite large units of several thousand pounds capacity. The application will also dictate which of a wide variety of conveyor possibilities (skate wheel, roller, ball top; steel, aluminum, stainless steel, various coatings, etc.) shall be incorporated into the design.
System #643 is appropriate for use in a wide variety of larger case weighing applications. Given a user provided input transfer speed of 60 FPM, the System #643 can comfortably weigh cases up to 50 Lb. and 24" in length, In-Motion at a pace of 15 cases per minute, within an accuracy of +/- 0.02 Lb..
Many variations of the Systems #642 & #643 are available. Contact the factory for options such as: all stainless steel wash-down construction, changes in conveyor heights, changes in capacity, reject mechanisms, indexing mechanisms, etc..
- Heavy
construction, mild steel scale stand (painted).
- Integral DWM-IV controller mounting column.
- Scale
capacity: 50 X 0.02 Lb.
- Conveyor
size: 24" wide X 36" long.
- Conveyor
height: Infeed = 32", Outfeed = 29" (plus adj. leveling legs: +/- 1").
- Conveyor
type: Skate wheel.
- PGC
2424-100 custom scale platform with precision load receiver.
|
|
|
|
|
|
|
|
|
|
|